TIRE SIPING MACHINE
OPTIONS
- STE-M AUTOMATIC CYCLE FEED
AUTOFEED CONTROL BOX BASICS
- TROUBLESHOOTING
Disconnect power before opening
control box
FIG. 1 - INSIDE OF CONTROL BOX
NOTE:
Prior to shipping, the electronic components in each
control box are factory set, tested and approved for
optimum performance.
If, upon installing a Siper STE-M with an Automatic Cycle
Feed (ACF) feature and it fails to work, please review this
guideline.
Disconnect your power source. Open the control box
located on the side of the machine. Visually check to see if
the breaker has 'tripped.' Reset the breaker.
FIG. 2 - YELLOW CIRCLE INDICATES THE BREAKER ‘TRIPPED’
In Fig. 2 a circuit breaker is tripped
(circled in yellow). Note the
position of the toggle switch and
the red arrow changing to green. If
any breakers 'trip,' flip the toggle
and return it to an "ON" position
Содержание STE-M
Страница 6: ......