TSI Instruments PRESSURA 8630-PM, Руководство по эксплуатации и обслуживанию

Страница: 18 / 49

Part Two
12
Menu and Menu Items
The PresSura controller
is a very versatile device which can be configured to meet your
specific application. This section lists all of the menu items available to program and
change (except diagnostics menu). Changing any item is accomplished by using the
keypad, or if communications are installed through the RS-485 Communications port. If
you are unfamiliar with the keystroke procedure please see
Software Programming for a
detailed explanation. This section provides the following information:
- Complete list of menu and all menu items
- Gives the menu or programming name
-
Defines each menu item’s function; what it does, how it does it, etc.
- Gives the range of values that can be programmed
- Gives default item value (how it shipped from factory)
The menus covered in this section are divided into groups of related items to ease
programming. As an example all calibration items are in one menu, alarm information in
another, etc. The manual follows the menus as programmed in the monitor. The menu
items are always grouped by menu and then listed in menu item order, not alphabetical
order. Figure 5 shows a chart of all Model 8630-SM standard monitor menu items. Figure
6 shows the additional menu items (in bold) available on the Model 8630-PM premium
monitor.
ALARM
NEG LOW ALM
NEG HIGH ALM
POS LOW ALM
POS HIGH ALM
ALARM RESET
AUDIBLE ALM
ALARM DELAY
MUTE TIMEOUT
ACCESS CODE
CONFIGURE
ROOM MODE
DISPLAY AVG
UNITS
ACCESS CODE
CALIBRATION
SENSOR ZERO
SENSOR SPAN
ELEVATION
ACCESS CODE
INTERFACE
OUTPUT RANGE
OUTPUT SIG
ACCESS CODE
DIAGNOSTICS
*
SENSOR INPUT
SENSOR STAT
ANALOG OUT
KEY INPUT
LOW ALM REL
ACCESS CODE
*
Menu items located in Troubleshooting section
Figure 5: Menu items - Model 8630-SM Standard Monitor