TSI Instruments AEROTRAK 9310 Скачать руководство пользователя страница 63

Страница: 63 / 91

Operation

3-33

Export Data Screen

Use the Export Data screen to export sample data to a flash drive.
Select the name of the file and range of data to export. Data is
downloaded into an XML file that can be opened with commonly used
spreadsheet programs.

To Export Data

1. Click the USB drive icon on the Data tab. The Export Data screen

appears.

Field

Description

Secured file

This file is intended to be used with TrakPro Lite Secure
software and maintains CFR 21 Part 11 compliance.
The file has the extension

file name

_sec.xml

Unsecured file

This file is intended for user input into Excel for
graphing and data manipulation purposes and has the
extension

file name

.xml

Both

If using both file types, both file formats can be
exported. Please note that the data export time is
longer when both file formats are exported.

C A U T I O N

NOT

modify the secure file. If the “_SEC” secure file is modified,

TrakPro Lite Secure software will not be able to open the file.

Содержание AEROTRAK 9310




























































































Результаты поиска

Содержание AEROTRAK 9310

Отзывы:

TSI Instruments AEROTRAK 9310, Руководство по эксплуатации, Страница: 63 / 91

Результаты поиска

Содержание AEROTRAK 9310

Отзывы: