-4-
4. To turn the power off, hold down the power switch.
A dialog box will come up asking if you want to turn
off the instrument or put in standby mode to charge
the batteries.
DO NOT SHUT DOWN THE INSTRUMENT BY
DISCONNECTING THE POWER CORD OR
LOSS OF DATA MAY RESULT.
5. There are four screens accessible using the tabs at
the bottom: Main, Setup, Data, and Reports. Some
screens require you to enter information. To enter
information, tap on the screen and an on-screen
keyboard appears.
6. The Main screen is the default. It shows the current
status of the particle counter and the latest sample
values.
7. Use the Setup screen to set up parameters for the
particle counter (including data display, system
configuration, device, sampling, and Recipes).
8. Use the Data screen to review data that has been
collected.
9. Use the Reports screen to select various standard
reports for viewing and printing.
10. The screens and their options are explained in
detail in the Operation Manual.
Using the Onscreen Keyboard
1. Throughout the setup screens, a keyboard will
appear on the screen. Data may be entered using
this keyboard.
2. When the entry is complete, press either the
(
Enter
) or
Esc
key. The keyboard will then be
hidden until another text entry box is selected.
3. When numeric input is needed, a numeric keypad
will appear on the screen.
Touch Screen
Printer
Power Switch
Sample
Inlet
Pump
Exhaust
Diffuser
Power
Entry
Battery
Access
Service
Access
Filter
Scanner
USB A (Flash
Drive)
Manifold
Pressure
Port
Cooling
Fan
