manualshive.com logo in svg

TSI Instruments AEROTRAK+ 6201, Руководство по эксплуатации

Поделиться
Скачать
TSI Instruments AEROTRAK+ 6201 Скачать руководство пользователя страница 6

iv 

AeroTrak

®

+ Remote Particle Counter Operation Manual 

Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY AND 
LIABILITY, which contains the complete and exclusive limited warranty of Seller. This 
LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or its terms 
waived, except by writing signed by an Officer of Seller. 

Service Policy 

Knowing that inoperative or defective instruments are as detrimental to TSI as they are to 
our customers, our service policy is designed to give prompt attention to any problems. If 
any malfunction is discovered, please contact your nearest sales office or representative, or 
call TSI’s Customer Service department at 1-800-680-1220 (USA) or +001 (651) 490-2860 
(International). 

Trademarks

 

TSI, the TSI logo, and AeroTrak are registered trademarks of TSI Incorporated. Teflon is a 
registered trademark of DuPont. Modbus is a registered trademark of Modicon, 
Incorporated. Windows and Internet Explorer are registered trademarks of Microsoft 
Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. 

 
 
 

Содержание AEROTRAK+ 6201

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды