TSI Instruments 854033 Скачать руководство пользователя страница 4

 

 

 
TSI Incorporated

 

– Visit our websit

www.tsi.com

 for more information. 

 
USA 

Tel: 

+1 800 874 2811 

UK 

Tel: 

+44 149 4 459200 

France 

Tel: 

+33 1 41 19 21 99 

Germany 

Tel: 

+49 241 523030

 

India 

Tel: 

+91 80 67877200 

China 

Tel: 

+86 10 8219 7688 

Singapore 

Tel: 

+65 6595 6388

 

 

P/N 6008412 Rev. B 

©2016 TSI Incorporated 

Printed in U.S.A. 

9.  Remove vent plugs when weather conditions do not 

require use of the heater. Twist vent cover counter 
clockwise to remove vent plugs. Hand-tighten after 
removing plug. 

Operating Instructions 

1.  The heater thermoset is preset, no adjustment or 

setting is required. Thermostat will turn heater on 
automatically when the temperature inside the 
enclosure reaches approxi5°C (41°F). 

2.  The thermostat will automatically turn off the heater 

when the temperature in the enclosure is 
approxi15°C (59°F). 

Specifications 

Nominal Heater 
Power

 ............... 

 

 
24 Volts DC; 100 Watts 

Temp Range

 .... 

 

Will keep instruments inside 
enclosure above 0°C (32°F) with 
outside temperature down to -20°C 
(-4°F). 

 

Содержание 854033

Страница 1: ..._______________ TSI and TSI logo are registered trademarks of TSI Incorporated INSTALLING THE ENCLOSURE HEATER MODEL 854033 QUICK START GUIDE P N 6008412 REVISION B JANUARY 2016 ...

Страница 2: ...ck Green Small P N 3040025 Qty Item Description Reference Picture 1 Heater 2 Vent Plugs Warning Labels Warns that the instrument could be hot to the touch or a burn hazard Installing the Enclosure Heater 854033 1 If Model 854034 power supply is installed unplug the DC power cable from DIN rail unplug the main power to the power supply and snap the power supply clip off the upper DIN rail and go to...

Страница 3: ...nstall the Heater onto the DIN Rail and Plug into the two Phoenix Connectors just installed to the right of the Thermostat 7 Plug the remaining Thermostat wire into the side of the Heater Connector left side of connector Gray as shown DO NOT PLUG THE THERMOSTAT WIRES INTO THE GREEN YELLOW PHOENIX GROUND CONTACTS THE THERMOSTAT MUST PROVIDE POWER TO THE HEATER BYPASSING THE THERMOSTAT OR PLUGGING T...

Страница 4: ...ist vent cover counter clockwise to remove vent plugs Hand tighten after removing plug Operating Instructions 1 The heater thermoset is preset no adjustment or setting is required Thermostat will turn heater on automatically when the temperature inside the enclosure reaches approximately 5 C 41 F 2 The thermostat will automatically turn off the heater when the temperature in the enclosure is appro...

Отзывы: