_______________ TSI and TSI logo are registered trademarks of TSI Incorporated.
INSTALLING THE
ENCLOSURE
HEATER
MODEL 854033
QUICK START GUIDE
P/N 6008412, REVISION B
JANUARY 2016
Страница 1: ..._______________ TSI and TSI logo are registered trademarks of TSI Incorporated INSTALLING THE ENCLOSURE HEATER MODEL 854033 QUICK START GUIDE P N 6008412 REVISION B JANUARY 2016 ...
Страница 2: ...ck Green Small P N 3040025 Qty Item Description Reference Picture 1 Heater 2 Vent Plugs Warning Labels Warns that the instrument could be hot to the touch or a burn hazard Installing the Enclosure Heater 854033 1 If Model 854034 power supply is installed unplug the DC power cable from DIN rail unplug the main power to the power supply and snap the power supply clip off the upper DIN rail and go to...
Страница 3: ...nstall the Heater onto the DIN Rail and Plug into the two Phoenix Connectors just installed to the right of the Thermostat 7 Plug the remaining Thermostat wire into the side of the Heater Connector left side of connector Gray as shown DO NOT PLUG THE THERMOSTAT WIRES INTO THE GREEN YELLOW PHOENIX GROUND CONTACTS THE THERMOSTAT MUST PROVIDE POWER TO THE HEATER BYPASSING THE THERMOSTAT OR PLUGGING T...
Страница 4: ...ist vent cover counter clockwise to remove vent plugs Hand tighten after removing plug Operating Instructions 1 The heater thermoset is preset no adjustment or setting is required Thermostat will turn heater on automatically when the temperature inside the enclosure reaches approximately 5 C 41 F 2 The thermostat will automatically turn off the heater when the temperature in the enclosure is appro...
