TSCHAN TORMAX VSG, Инструкция по установке и эксплуатации

Страница: 8 / 9

05/2004 TSCHAN
   
-TORMAX VSG - 8 -
7 Maintenance
The flexible TSCHAN
®
TORMAX VSG coupling is maintenance free when operating.
During routine equipment monitoring examine:
•
The condition of the rubber element
•
Tight fit of all screws
•
Remove dust deposits from the coupling components and the coupling element
7.1 Inspection and servicing intervals
Injury hazard!
Switch off the drive before commencing any work on the coupling!
Secure the drive against accidental activation and rotation!
Adhere to the inspection and servicing intervals given in Table 2. If damage
to the coupling is noted on the initial inspection, in particular to the rubber
element, check if one of the causes given in Table 1 “Operating faults” may
be responsible. The inspection intervals should then be adjusted to suit the
governing operating conditions. Under special operating conditions, inspec-
tion and servicing work may also be necessary at shorter intervals.
Table 2 Inspection and servicing intervals
Industry
1. Inspection After 4 weeks Visual inspection
1. Service After 6 months Visual inspection
2. Service After 12 months Visual inspection and remove dust from coupling
components
Each further
inspection Every 12 months Visual inspection and remove dust from coupling
components
Mining
1. Inspection After 4 weeks Visual inspection
1. Service After 6 months Visual inspection
2. Service After 6 months Visual inspection and remove dust from coupling
components
Each further
inspection Every 6 months Visual inspection and remove dust from coupling
components