TSC TTP-286MT Series Скачать руководство пользователя страница 55

Страница: 55 / 63

- 48 -

6.3.3 Using Ethernet interface to setup Ethernet interface

1. Connect the computer and the printer to the LAN.

2. Turn on the printer power.

3. Start the Diagnostic Utility by double clicks on the

icon.

4. Select

“Ethernet” as the interface then click on the “Setup” button to setup the IP address, subnet

mask and gateway for the on board Ethernet.

5. Click the

“Discover Device” button to explore the printers that exist on the network.

6. Select the printer in the left side of listed printers, the correspondent IP address will be shown in the

right side

“IP address/Printer Name” field.

7. Click

“Change IP Address” to configure the IP address obtained by DHCP or static.

The default IP address is obtained by DHCP. To change the setting to static IP address, click

“Static

” radio button then enter the IP address, subnet mask and gateway. Click “Set IP” to take effect the

settings.

Содержание TTP-286MT Series
































































Результаты поиска

Содержание TTP-286MT Series

Отзывы:

Бренды по названию

Популярные бренды

TSC TTP-286MT Series, Руководство пользователя

Результаты поиска

Содержание TTP-286MT Series

Отзывы:

Бренды по названию

Популярные бренды