TSC TTP-2410M Pro, Руководство по обслуживанию

Страница: 50 / 54

49
TTP-244M Pro/244ME Pro
TTP-342M Pro/342ME Pro
Bar Code Printer Service Manua
l
5.3 Calibrating the Gap Register
1. Install the label.
2. Turn on the printer power while pressing the PAUSE button, the printer will
calibrate the transparency of the backing paper and adjust the gap register.
5.4 Self Test
1. Install the label.
2. Turn on the printer power while pressing the FEED button, the printer will:
(1) Print print head check pattern.
(2) Calibrate the label length.
(3) Print internal settings.
(4) Initiate self-test.
(5) Enter dump mode.
5.5 Clearing RAM
Press the PAUSE button and FEED button more than 3 seconds, the printer will
clear the memory and reset the printer.
Be sure to calibrate the gap register with blank label before printing.
5.6 Diagnosis Operation Procedure
When the power is turned on without pressing any button, self diagnosis is
automatically performed to test the available memory. If any error should occur
at this moment, the ERR light will flash.
Do the self test and inspect the test pattern to check if the thermal head is
available.