TSC TDP 248M, Руководство по обслуживанию

Страница: 6 / 76

3
TTP-248M/2410M Bar Code Printer
Service Manua
l
Ventilation Free air environment
Sensors
Label gap (256-level), ribbon end (16-level), black
mark (256-level), carriage open, ribbon near end
Memory
Flash Memory 2MB, DRAM 4MB and optional Flash
Interface RS-232C 56000bps ( Max.), Centronics
Cutter 116 mm width (Paper thickness up to 0.28 mm)
Power
100 VAC to 120 VAC, 200 VAC to 240 VAC
Switching mode power supply.
Input Frequency : 50Hz to 60Hz
Input Current : 4.0 Amps at max.
Inrush Current :
40 Amps max. (cold start) at 115 VAC input line
voltage.
80 Amps max. (cold start) at 230 VAC input line
voltage.
Electrical
CPU HITACH SH 7709A
TPH ROHM KF2004-GL41D 550 Ω
Stepping Motor
Mitsumi 24V 7.5 Degrees 4 Ω Japan Servo KH56KM
Memory
SDRAM, 1M×16Brt×2 7ns
Flash Memory: (512K×16Bit) ×2 70ns
Compliance CE, UL/CUL, BSMI, FCC Class A, TÜV-GS
Communication Interface
Communication
RS-232C (DB-9) at 2400, 4800, 9600 or 19200 38400,
56000, 57600, 115200, 128000, 50000 baud rate
Word Length 7 or 8 data bits, 1 or 2 stop bits, selectable parity
Communication Protocol XON/XOFF and DSR/DTR
Parallel Port Standard parallel interface
Input Buffer 10KB