TSC TDP 248M, Руководство по обслуживанию

Страница: 57 / 76

54
TTP-248M/2410M Bar Code Printer
Service Manua
l
4.7 Replacing Label Rewind Spindle
1. Remove the Tension Spring from Paper Clamp.
2. Remove the Spindle Outer Washer. (Please refer to the 4.4 steps)
3. Take out the Compression Spring.
4. Remove the Spindle Inner Washer.
5. Remove the 1” Label Spindle.
6. Remove the Stainless Washer.
7. Remove the Spindle Leaf Spring.
8. Remove the Shaft Bearing.
9. Remove the Felt Fabric.
10. Remove the Label Guide.
11. Remove the Felt Fabric Support Plate.
12. Remove the E-ring on the Gear.
13. Remove the Gear and the Belt.
14. Loosen the screws on the Label Spindle Support Plate.
15. Remove the Label Rewind Spindle Core and Label Spindle Support Plate.
16. Reassemble in the reverse procedures after replacing.