TSC TDP 245-Plus, Руководство пользователя

Страница: 37 / 47

34
4.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns green/amber after 5 green blinks. (Any
green/amber will do during the 5 blinks).

The LED color will be changed as following:
Amber

red (5 blinks)

amber (5 blinks)

green (5 blinks)

green/amber
(5 blinks)

red/amber (5 blinks)

solid green
4.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor
Please follow the steps as below.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns red/amber after 5 green/amber blinks. (Any
red/amber will do during the 5 blinks).

The LED color will be changed as following:
Amber

red (5 blinks)

amber (5 blinks)

green (5 blinks)

green/amber
(5 blinks)

red/amber (5 blinks)

solid green
4.6 Skip AUTO.BAS
TSPL2 programming language allows user to download an auto execution file to flash
memory. Printer will run the AUTO.BAS program immediately when turning on printer
power. The AUTO.BAS program can be interrupted without running the program by the
power-on utility.
Please follow the steps as below.
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid green .

The LED color will be changed as following:
Amber

red (5 blinks)

amber (5 blinks)

green (5 blinks)

green/amber
(5 blinks)

red/amber (5 blinks)

solid green
4. Printer will be interrupted to run the AUTO.BAS program.