16
3.2 Charge the Battery
It takes 1.5 to 2 hours to fully charge the battery before the first time usage. The
lifetime of the battery is 300 times for charge/discharge cycles.
3.2.1 Charge the Battery
1. Open the interface cover and plug the
power cord in to the power jack.
Note:
Please switch OFF printer power prior to plug
in the power cord to printer power jack.
When the battery is charging, please do not
remove the battery from the printer,
otherwise, please re-plug the power cord into
a power outlet.
2. Plug the power cord into a properly
power outlet.
3. When the battery installed on printer and start charging, the printer will
automatically open and color of battery status LED indicator is solid amber.
The amber LED indicator will turned off after the battery is fully charged.
Battery charging Battery fully charged Auto power off
Note:
1. When printer start charging, the printer will automatically open and could not turn-off
the power.
2. When checking the battery status, please connect the adapter to printer, the LED
indicator will turn to green then extinguished when the battery is fully charged.
