Safety, Installation, and Operations Manual
©2021 TSC PowerHome All rights reserved. Contents subject to change without notice. TSC-MAN-0002 Rev 01, 04-2021
14
High Performance Solar
7.2 Grounding By Using Unused Mounting Hole
The existing mounting holes which have not been used can be used for grounding.
A. Direct the grounding clamp to the mounting holes in the frame. Thread the grounding clamp and the frame
with grounding bolt.
B. Put the toothed gasket into the other side, then tighten and lock the nut. The recommended torque of
locking the nut is 2.0 N·m-2.2 N·m.
C. Thread the grounding clamp with grounding wire. The materiel and size of grounding wire should meet the
relevant requirements of the national, regional and local code, law and standard.
D. Finish the mounting with tightening the binding bolt of grounding wire
Figure 7 Installation Methods
Figure 8 Installation Methods
