TSC 346M Pro Скачать руководство пользователя страница 81

Страница: 81 / 92

5.3 Using Ethernet interface to setup Ethernet interface

1. Connect the computer and the printer to the LAN.

2. Turn on the printer power.

3. Start the Diagnostic Utility by double clicks on the

icon.

Note: This utility works with printer firmware V6.00 and later versions.

4. Select

“Ethernet” as the interface then click on the “Setup” button to setup the IP

address, subnet mask and gateway for the on board Ethernet.

5. Click the

“Discover Device” button to explore the printers that exist on the network.

6. Select the printer in the left side of listed printers, the correspondent IP address will

be shown in the right side

“IP address/Printer Name” field.

7. Click

“Change IP Address” to configure the IP address obtained by DHCP or static.

The default IP address is obtained by DHCP. To change the setting to static IP

address, click

“Static IP” radio button then enter the IP address, subnet mask and

Содержание 346M Pro





























































































Результаты поиска

Содержание 346M Pro

Отзывы:

Бренды по названию

Популярные бренды

TSC 346M Pro, Руководство пользователя

Результаты поиска

Содержание 346M Pro

Отзывы:

Бренды по названию

Популярные бренды