6
Start and Stop Recording
To start recording, set the switch into the RECORD
position. To stop recording, set the switch into
the STOP position. The voice recorders’ LED will
blink five times and start recording. Then the voice
recorders’ LED will start blinking in a sequence
while the recording is in progress. Blinking
sequences indicate the battery status and available
memory. The first sequence indicates the battery
status: 1 flash – fully charged, 2 flashes – enough
for work, 3 flashes –urgent replacement required.
In 2-4 seconds there follows the second blinking
sequence indicating the amount memory available:
1 flash – 76-100%, 2 flashes -51-75%, 3 flashes
– 25-50%, 4 flashes – 1-25%.