Tryton TDW1200K, Руководство по эксплуатации

Страница: 7 / 44

7
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
E C DECLARATION OF CONFORMITY
MANUFACTURER:
PROFIX Sp. z o.o. ul. Marywilska 34 03-228 Warszawa Poland
Person who was authorized to develop technical documentation:
, Trade and Distribution Centre PROFIX, ul. Dobra 3, Łomna Las, 05-152 Czosnów
This is to confirm that the following products:
IMPACT DRILL, by TRYTON, PROFIX code:
IMPACT DRILL, by TRYTON, PROFIX code:
230 V; 50 Hz; 1200 W; cl. II; 13; n : 0-1100 rpm, 0-2800 rpm
o
meet essential requirement included into the following Directives of the European Parliament and the Council:
2006/42/EC of 17 May 2006 on machinery, and amending Directive 95/16/EC (Official Journal of the EU L 157 of 9
June 2006, p. 24, as amended);
2006/95/EC; ( Official Journal of the EU L 374 of 27 December 2006, p. 10—19 as amended );
200 4 / 108 /EC of 15 December 2004 on the approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive 89/336/EEC (Official Journal of the EU L 390 of 31 December
2004, p. 24 -37 as amended) ;
2011/65/EU of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment
(Official Journal of the EU L of
and have been manufactured in accordance with the standards:
EN 60745-1:2009+A11:2010 EN 60745-2-1:2010
EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
Mariusz Rotuski
TDW1200 type: AT3232(Z1J-KA17-13);
TDW1200K type: AT3232(Z1J-KA17-13);
ø
174 01.07.2011, p. 88);
Mariusz Rotuski
Ł omna Las , 02.07.2013
L . dz . : DT-C2/d_zg/0103/01/07.2013
This declaration of conformity is issued under the sole responsibility of the manufacturer;