Tryton SYSTEM 20V TJPS70AL, Руководство по эксплуатации

Страница: 7 / 56

for medical assistance. The liquid that leaks from batteries may be a - Harmful emissions of wood dust when working in closed premises.
reason for irritation or scalds.
When the battery unit is not in use keep it far away from
Cordless sabre saw
metallic items such as paper clips, coins, keys, nails, bolts or
Saw blade for wood
other metal things that may short the battery terminals.
-
Shorts of battery terminals may cause burns or fires.
ź
Battery TJ2AK -
Never throw batteries to fireplaces.
ź
Hex key
Never charge a damaged battery.
Operating instruction-
The batteries are intended for multiple use and contain
harmful lithium.
Upon the battery lifetime expires the battery must be disposed
The numbering of device elements refers to the drawing on pages 2-3 of the
in accordance with environmental regulations. Discharge the
instruction manual:
battery first top the empty state and remove from the electric tool. Hand
Blade
over to an organization that deals with utilization of batteries or take it
Working foot
back to the shop where the tool had been purchased.
Blade clamp
Using the charger:
Collar
a) Use only dedicated power adapters to charge the battery.
Auxiliary handle
Application of a power adapter dedicated to charge another type of the
Safety button
battery unit poses a risk of fires.
On/off switch
b) Do not disassemble the charger.
Main handle
c) The charger is designed exclusively for indoor use. It must not be
Battery
exposed to water or moisture.
Battery lock button
d) Charge only in an ambient temperature between 15-25
Hex key
degrees.
Foot mounting screws
e) Do not insert metal objects of any kind into the charger.
Charger
CONSTRUCTION AND PURPOSE OF THE SABRE SAW:
The sabre saw is a device powered by a 20 V battery.
Battery level indicator button
It is a device used for making cuts and patterns in wood and similar
Battery level indicator
materials, plastics, metal, ceramic plates and rubber. It can be sued for
TECHNICAL PARAMETERS:
straight and curved cuts. The cutting process is performed using a
suitable saw blade, appropriate to the material being processed.
The device is not suitable for long-term work in difficult
Any use of the saw in a manner contrary to the purpose given above is
forbidden and will void the warranty and the manufacturer's liability for
any resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
Proper use of the saw also applies to maintenance, storage, transport
and repairs.
The saw can be repaired only at service centres designated by the
manufacturer.
Battery-powered devices should be repaired only by
authorised persons.
Proper use cannot guarantee that no residual risk will occur. Due to the
design of the machine, the following risks may occur:
- Touching the blade while working in the unprotected area of t ​​ he
jigsaw;
- Burns when replacing the blade. (The blade gets very hot during
The vibration level value given refers to basic application of the tool. If the
operation, use protective gloves to avoid burns when replacing it);
tool is used for other applications or with other tools, or if it is not
- Throwing a machined part or pieces of a machined part,
maintained properly, the vibration level may differ from the values given.
- Blade cracking/breaking;
The above-mentioned causes may lead to higher exposure to vibrations
- Hearing damage in case of failure to use necessary hearing protection;
during the whole work time.
THE SET INCLUDES:
i )
pc.
pc.
1pc.
1pc.
j )
pc.
k )
1pc.
Warranty card - 1 pc.
DEVICE COMPONENTS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14. Adapter
Do
never use the tool for applications that need use of professional
equipment.
ź
-1
ź
- 1
ź
Charger TJ3LD
-1
ź
ź
15.
16.
7
Li-Ion
Cutting range
Steel 10 mm
MODEL TJPS70AL
Supply voltage 20 V d.c.
Stroke frequency without load 0-2800/min
Stroke length 22 mm
Wood 100 mm
Weight (with battery) 1,96 kg
Acoustic pressure level (LpA) 82,2 dB(A)
Acoustic power (LwA) 93,3 dB(A)
T olerance of measurements K , K
LpA LwA
3 dB(A)
Vibration as per
EN 62841
cutting boards a
h, B
cutting a wooden beam a
h, WB
2
18,067 m/s
2
16,844 m/s
T olerance of measurements K 1,5 m/s²
Battery charging voltage
Charging time
Charger power voltage 1 1 0- 2 4 0V, 50 -60 Hz
4-5 h
20 V
Battery capacity 2.0 Ah