Nova Connect Assembly Instructions
–
Rev B
Page 3
NOVA HARDWARE PACK
•
Label Hardware Kit Nova (1)
•
Hex L-Key -
3/16” size
(1)
•
Torx Security L-Key - T25 (1)
•
Hex L-Key -
5/32” size (1)
•
Screw 10-24 x 3/4" Security Torx, Button head, SS (1)
•
Screw 1/4-20 by 1" Socket Head, Zinc (8)
•
Belleville (dome) Washer 1/4" 18-8 SS (4)
ADDITIONAL TOOLS NEEDED FOR INSTALLATION
•
Scissors for cutting channel cover to length.
ASSEMBLY INSTRUCTIONS
Note: Shipping box pictures show Nova Connect Cart for
assembly reference. Configurations may vary, but the installation
process will be similar.
INSTALLATION OF ACCESSORIES TO THE CARTS
Note: When installing accessories, the Z or T-Nut has to be loose
and aligned vertically (up/down) when inserted into the extrusion
channel. Once adjusted at the desired height, tighten the screw
until it is fully locked to the extrusion. Always verify that the nut is
aligned across the channel (left/right) when fully tightened.
