Nova Connect Assembly Instructions
–
Rev B
Page 17
16.
NOVA CONNECT - POLY P15/X30 MOUNT INSTALLATION
•
Remove channel cover strip (ref. point 3).
•
Loosen T-Nut but do not remove, insert T-Nut into the
extrusion channel, move bracket up or down to desired
height.
•
Tighten bracket to extrusion with screw and T-Nut.
•
Install camera/speaker, as per example, as shown.
•
To adapt the mount from P15 to X30 or reverse, undo two
(2) screws from hinge and flip plate over, re-install two (2)
screws.
