Trynex SweepEx SWB-480, Руководство по сборке

Страница: 10 / 16

10 © TrynEx International 2013 (REV A) F51302C
STEP 19
Continued from previous page...
The ties here must form
a loop. Do not tighten.
The cable must be able
to move when the handle
is folded.
Assembly Instructions
STEP 20
Attach the Brush Cover Side Panels.
A. Parts.
B. Position the side
panel so that the holes
are concentric.
D. Repeat this proce-
dure for the second
panel.
C. Push the bolts
through from above.
Push the washers on
from below and screw
on the nuts. Tighten.
A. Parts.
STEP 21
Installing the Brushes.
Axle with Ca
p, Nuts
Brushes
Locknut
Washer
Cap
IMPORTANT
The brushes must be
assembled so the black
row of bristles touches
the ground before the
white row of bristles
when the brush rotates.