Trynex Sweepex SWB-400, Руководство пользователя

Страница: 9 / 28

9 © TrynEx International 2013 (REV A) F51231A
The speed of the brushes can be increased using the lever on the left handlebar. The brush speed must only be adjusted when the brush is
switched on.
When sweeping dust, use a low brush speed.
When sweeping leaves or similar material, use a high brush speed.
When sweeping snow, use a high brush speed.
When using the Debris Collector Box, use a medium brush speed.
Remember that an increased brush speed will throw debris farther, therefore increasing the danger zone.
Operating Instructions
Operator Controls
SELECTING A GEAR
FREEWHEEL
ADJUSTING BRUSH SPEED
Come to a complete stop before changing gears.
The SWB-400 is equipped with a three-speed transmission. First Gear is the slowest setting and engaged by pushing the shift lever all the
way forward. Third Gear is the fastest setting and is engaged by pulling the lever all the way back. Second Gear is in the middle. You will feel
the lever lock into a detent and hear a “click.” The active gear is the smallest visible number on the ‘indicator’ below and to the right of the
shift lever.
See “Component Vocabulary” for location of ‘Shift Lever.’
There is a freewheel mechanism on each wheel. The freewheel makes turning the machine easier. One or both wheels can be locked for
working on inclines and when clearing snow.
The freewheel is disabled by putting the linchpin through both wheel and axle, locking the two together.
When using the plow or using the leaf collector, locking the wheel on the windrow-side will reduce the lateral force on the handlebars.
Freewheel.
Locked.
Plowing.
Faster
Slower
Locked.
Freewheel.