Trynex Sweepex SWB-400, Руководство пользователя

Страница: 8 / 28

8 © TrynEx International 2013 (REV A) F51231A
Operating Instructions
Operator Controls
If the brushes are switched on and the SWB-400 is not in gear the machine can roll backwards.
The handlebar must be securely engaged at the required height.
Avoid injury and damage; Make completely sure that there are no persons or objects within the danger zone.
With long sleeves, the handlebar can get stuck inside the sleeve; This could prevent the drive from disen-
gaging and result in injury. Set the bar lower if wearing long sleeves or tightly button the sleeves.
HANDLEBAR CONTROLS
DRIVING AND SWEEPING
Brush Speed
Adjustment
Brush
Engagement
Throttle
Forward
Reverse
Sweeping and Driving can be engaged independent of each other. Having the brush engaged without the transmission engaged will cause
the machine to roll backward. The brush can be engaged and disengaged as necessary while driving.
The brush speed can be adjusted to your preference (see “Adjusting Brush Speed”). If the brush starts to leave debris behind, increase the
rotation speed (see ‘Adjusting Brush Speed’) and select a lower gear (see ‘Gear Selection’).
The SWB-400 is also equipped with a reverse gear. Come to a complete stop before engaging the reverse gear. Ensure the area behind is
clear before backing up. Do not operate brush in reverse.