L1159 © Trynex International 2006
4 — 26
Operating the Spreader
PREPARATION
CAUTION –
Sweep area clear of foreign objects or obstacles that could cause personal injury. Keep other persons, children, or animals ou
t
of the area to be spread.
SPREADER LOADING
WARNING –
Do not overload vehicle. Use chart below to calculate weight of material. Weights of material are an average for dry materials
.
Material
Weight Per Cubic Ft.
Rock Salt
35-40 lbs.
Sand/Salt Mix
95-120 lbs.
•
Be sure to comply with manufacturer’s maximum gross vehicle weight ratings.
•
Warning
– Never leave materials in hopper for long periods of time as salt is hygroscopic and will attract atmospheric moisture and
harden up. When spreading sand mix, a 1:1 ratio for Sand/Salt mix is recommended to prevent the material from freezing.
SPREADING TIPS
•
Never exceed 10 m.p.h. when spreading.
•
For a wider pass, increase spinner speed.
•
For a heavier pass, drive slower, or increase auger speed.
•
Never operate spreader near pedestrians.
•
Spread ice melters with the storm to prevent unmanageable levels of ice.
•
Calculate spread pattern when near vegetation.
V-MAXX 8500 CONTROL OPERATION
•
The Dual Variable Speed Control has dual finger-tip dials for maximum performance, digital system status with warning protec
tion and
built-in Vibrator Switch.
•
To start, press power switch on controller and spreader will accelerate to speed set on spinner and auger dials.
•
To stop, press power switch on controller to off position.
•
Speed of auger and spinner may be adjusted separately to get desired flow and spread distance
from spreader.
•
The Vibrator Switch is needed for dense material or to increase the flow to the auger. This eliminates bridging of material
in hopper.
•
In case spreader becomes jammed, it will go into an auto-reverse program to free itself. Auger display will show (AR) while t rying to
clear obstruction.
Содержание SnowEx V-Maxx 8500
