STAND ALONE CARD READER SYSTEM
DoorKing’s Stand Alone Card Reader is designed to manage an access point without needing a access control system. Memory for 1000 cards (DK
Prox Reader). It’s relay output controls electric strikes or magnetic locks. Free exit input allows exit button to open door. 26-Bit wiegand input
allows connection of a second card reader. Programming using control cards or IR remote. 12VDC power supply included.
ADD card
DELETE
card
Control Cards
(included)
Do not mount the card reader to a moving gate, or immediately next to a gate panel or pedestrian gate. Continuous vibration from slamming gates and vibration can
cause damage to the system over time.
WARNING!
If the card reader is used to activate a vehicular gate operator, it must be mounted a minimum of 10 feet away
from the gate and gate operator, or in such a way that the user cannot come into contact with the gate or gate operator while using the card reader.
Installation
1
2
3
4
5
6
7
8
9
0
#
EXIT
DEL
REV
ADD
CALL
IR Remote
(included)
Power
Supply
(included)
Card Reader with Lighted Enclosure
(P/N 1524-080)
Optional Mounting:
Enclosure can be mounted on
a DoorKing gooseneck
mounting post (not supplied).
Important:
After installation, the card
reader will need to be
programmed for desired
features using the control
cards and/or the IR remote
(see back page).
Mounting Note:
Be sure to clean out enclosure
of any debris after installation
that can cause a short.
Mounting Note:
Can be custom
mounted directly
to a wall.
ADD card
DELETE
car
d
Control Cards
(included)
1
2
3
4
5
6
7
8
9
0
#
EXIT
DEL
RE
V
AD
D
CALL
IR Remote
(included)
Power
Supply
(included)
Card Reader Only
(P/N 1524-331)
Gray - Normally Closed (NC)
Purple - Common
Blue - Normally Open (NO)
Green - Data 0 (wiegand)
White - Data 1 (wiegand)
Y
ellow - Exit Push Button
Black - 12VDC Common
Red - +12VDC
8-Pin Connector Wiring
RED
- +1
2VDC
BLA
CK -
12V
DC CO
M
PURP
LE -
CO
M
YELLO
W
- PUSH
GREEN
- Dat
a 0
WH
ITE -
Dat
a 1
GRA
Y - NC
BL
UE -
NO
HM 100
0
Mounting Hole
Mounting Hole
8-Pin
Connect
or
Mount
ing
Plate
Mounting Screw
Card Reader Assembly
12VDC
Power
Supply
Optional Second 26-Bit
Wiegand Card Reader
Lighted enclosure’s
factory wired
power for LED light.
(P/N 1524-080)
Push Button
(Free Exit)
Electric
Strike
Maglock
NC
NO
12VDC
Ground
Data 1
Data 0
Positive
Negative
EXIT
PUS
H TO
DoorKing Part Numbers
Copyright 2015 DoorKing, Inc. All rights reserved.
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
Separate
Power
Supply
Separate
Power
Supply
1524-331 1524-080
card reader only
card reader with lighted enclosure
Enclosure has
LED light to
illumin
ate
card reader
1
1524 065-M-8-15
