Trycom Technology TRP-C34X, Руководство пользователя

Страница: 7 / 35

Port Setting:
COMA,COMB:115200,8,N,1.
Operating Mode: Real Com Mode.
Accessible IPs: None Setting.
Auto Warning: None Setting.
IP Address Report: None Setting.
Password: Factory: trycom
2-4. Push Button.
If lost the password or wrong setting, user can keep push button till the PWR LED off and then
reboot back factory setting.
3 . Installing TRP-C34X Hardware.
STEP1: Connect the power source from DC-Jack or screw terminal, the PWR LED will
blinking, wait till PWR LED ON.
STEP2: Connect TRP-C34X with Ethernet port by RJ45 cable.
If the cable is properly connected the “LINK” LED will light up.
*The TRP-C34X Supports Auto-MDIX, A straight-through or crossover RJ45 cable
can be used to make a connection directly to the HUB/Router/PC LAN port.
STEP3: Connect TRP-C34X to RS232 by AWG #12~30 wires.
Connect TRP-C34X to RS422/485 by AWG #12~30 twisted wires.
3-1.RS485 Wiring.
The RS-485 mode supports the Transmit and Receive channels use twisted pair wire half-
duplex operation.
3-2.RS422 Wiring.
The RS-422 mode supports 4 channels with full duplex operation use dual twisted pair wire half-
duplex operation.
.