2-7. RS422 Wiring
The RS-422 mode supports 4 channels with full duplex operation for Receive, Transmit, the data
lines are in differential pairs.
2-8. RS232 Wiring
The RS-232 supports 8 channels plus Signal Ground and is configured as DTE like a computer.
Signals are single ended and referenced to Ground. To use handshaking, Flow Control must be set
to RTS/CTS during configuration. Refer to the Pin out table for connections.
2-9. USB Cable Wiring
TRP-C08D is true USB 2.0 specification; it also supports USB V1.0, V1.1 standard. It is strongly to
recommend user use the standard A to B type USB 2.0 cable if USB1.0 cable can not work
properly.
3. TRP-C08D Software Installation.
Step1. Power on and plug USB cable to TRP-C08D.
Step2. Please download driver from http://www.trycom.com.tw/DOWNLOAD.htm. (See figure1)
Step3.Perform pl254x….exe.
