ELE
C
TR
IC S
TANDING D
ESK
14
ASSEMBLY INSTRUCTIONS
Assemble the Sync Rod
•
Loosen the knob at the left side of the Sync Rod (E). Attach the
Sync Rod (E) to the motor spindle (Connecting Bar)and tighten the
knob securely (See Figure 1).
•
Loosen the knob at the right side of the Sync Rod (E) and pull out
the inner bar to match the desktop length.
•
Insert the inner bar of the Sync Rod (E) into the hex socket shaped
mounting hole on the Lifting Column until the red line rubber is
inside the hole (See Figure 2). Tighten the knob securely.
Note:
If needed, adjust the mounting hole on the lifting column to align
with the sync rod using the 8mm Allen Wrench (S-K).
5
S-K
Figure 2
Loosen
Figure 1
Loosen
Sync Rod
Left Side
Right Side
E
8 mm Allen
Wrench
S-K
