ELE
C
TR
IC S
TANDING D
ESK
12
ASSEMBLY INSTRUCTIONS
Attach the Motor to the Lifting Columns
•
Attach three Silicone Pads (S-H) to each
Side Bracket on the Lifting Columns.
•
Insert the left end of Connecting Bar(A) to
the hex socket shaped mounting hole on
the Lifting Column(C).
•
Insert the hex socket shaped mounting
hole on the Motor (B) to the right end of
Connecting Bar (A).
•
Pass the Motor (B) through the
Connecting Bar (A) and attach it to the
Lifting Column with 2 Screws (S-E) from
the side of the column and with the other
2 Screws (S-E) from the bottom using the
Phillips Screwdriver (S-L).
Note:
•
If the mounting hole on the lifting Column
cannot align to the connecting bar, adjust
the mounting hole using the
8 mm Allen
Wrench
(S-K).
S-H
S-K
S-L
S-L
Silicone Pad × 6
S-H
Connecting Bar
Left Right
A
8 mm Allen Wrench
S-K
Motor
B
Phillips Head
Screw × 4
S-E
Phillips Screwdriver
S-L
3
Left Ri
ght
