Installation Guide
27
You can activate a password via a web browser and via
TruVision Device Manager (included on the CD to find the IP
address of the camera).
Activation via the web browser:
1. Power on the camera and connect the camera to the
network.
2. Input the IP address into the address bar of the web
browser, and click
Enter
to enter the activation interface.
Note
:
The default IP address of the camera is 192.168.1.70.
For the camera to enable DHCP by default, you must
activate the camera via TruVision Device Manager.
Please refer to the following section, “Activation via
TruVision Device Manager”.
3. Enter the password in the password field.
Note
: A valid password range must be between 8 and 16
characters. You can use a combination of numbers, lower
Содержание 6 IP Series
