TO RE-ADJUST THE HANDLE-LOCK MECHANISM
Unlock the handle and place it in the upright position. Tighten the adjusting nuts
until there is a slight drag when the handle is raised or lowered. (Fig. 7)
Fig. 7
TO ADJUST THE DRIVE BELT:
(High-speed models only)
1.
Loosen, but do not remove the 4 bolts, that hold the motor to the frame.
(Fig. 8)
2.
Tighten the 2 screws at the back of the frame until the belt is tight. . Test and
re-adjust the belt until the belt does not slip. Re-tighten the four motor bolts.
WARNING
:
Do not over-tighten the belt.
Fig. 8
CLEAN UP & STORAGE
1.
Unplug and wrap it under the cord hook and around the left side handle grip. Clean the cord and
inspect it for cuts, gashes and loose prongs.
2.
Wipe down the machine and store in clean dry place.
