PREPARING THE MACHINE FOR OPERATION
Your floor machine will operate in a wide variety of hard floors and carpet cleaning applications. Consult
with your local dealer or CleanFreak’s Customer Service to select the correct accessories for the job you
are going to perform.
PAD INSTALLATION
To install pad, tilt the machine back on wheels until machine is resting on handle. Remove center
lock by twisting it counterclockwise. Center the pad on the pad holder and re-insert pad center lock
by twisting clockwise. Make sure the center lock is tight.
To remove: Twist the center lock counterclockwise.
MACHINE OPERATION
1.
Install the pad.
2.
Plug in machine.
3.
Lower the handle to the desired operating position.
*when you start the machine with the pad lifted off the floor. Once it starts spinning then you may lower
to the floor and start working.
TO MANEUVER YOUR HIGH SPEED FLOOR MACHINE:
1500RPM OR 2000RPM
ONLY
1.
With the pad installed, turn on the floor machine and move forward then backwards until the
maximum gloss is reached.
2.
Keep the machine moving and do not stay in one spot.
3.
Practice until you gain experience in operating the unit.
