TRUST UN110W WIRELESS NOTEBOOK CONNECTION KIT
4
The Wireless LAN Utility must be installed on both systems for both the Wireless
PC-Card and the Wireless USB adapter. Follow the instructions given below.
1. Start
Windows.
2.
Insert the CD-ROM containing the driver and applications into your CD-ROM
drive.
3.
The Trust Software Installer will start automatically. If it does not start
automatically, click on ‘Start – Run’, type [D:\Setup.exe] in the command line
and click on ‘OK’ (see figure 1).
Note:
The language selection menu in the left-hand window is only
used for selecting the language you wish to use to display the
Trust Software Installer.
4.
Click on ‘Wireless LAN Utility V2.0’ to start the installation of this application
(see figure 1).
5.
Follow the on-screen instructions to complete the installation.
6.
Restart your computer after the installation.
4
Checking after the installation
After installing the UN110W Wireless Notebook Connection Kit, the following are
installed on your computer and can be checked.
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
- Network adapters – Trust UN110W Wireless Network (on the system with the USB)
- Network adapters – Trust PN110W Wireless Network (on the system with the PC-
Card)
Start – Programs - Trust – Wireless LAN Card
- Configuration Utility
Note:
The information given above may differ for different operating
systems.
Note:
The location or name may vary in the ‘Control Panel’ for different
operating systems.
5
Configuring the Trust Wireless LAN Utility
5.1
Windows 98 / Windows ME / Windows 2000
The Wireless LAN Utility will start automatically when your system is restarted. If it
does not start automatically, double-click on the Wireless Utility icon which has been
created in the taskbar. If this icon is not visible, click on ‘Start’, point to ‘Programs –
Trust – Wireless LAN Card’ and click on ‘Configuration Utility’. Follow the instructions
given below to use this Utility to configure your network settings.
Note:
The ‘Link Quality’ bar in the Utility only works if your PC-Card
and USB adapter have been configured for use with an Access
Point (Infrastructure). This can be used to view the strength of
your wireless connection.
1.
You can find general information concerning your wireless network in the
‘System’ tab. The ‘Regulatory Domain’ is the most commonly used
