Trust START-LINE AMU-500, Руководство пользователя

Страница: 11 / 76

AMU-500 UNIVERSAL SWITCH
3
6. Switching on the mains power
Switch on the mains power before you continue
with the installation. Make sure no more exposed
wiring is present.
The LED indicator on the receiver will be lit
continuously when the receiver is supplied with
power.
7A. Binding transmitter(s) to the receiver
Press the connect button for no more than
1 second (with a pointed object) to activate the
learn mode. The learn mode will be active for
12 seconds and the LED indicator on the receiver
will flash slowly.
7B
While the LED indicator is flashing, send an ‘on’
signal with a Trust Smart home transmitter to
save the relevant activation code in the memory
of the receiver.
7C
The LED indicator will flash quickly for a few
seconds once the code is received. The product is
now ready for use. Optionally, you can set a timer
(step 8). If this is not applicable you can proceed
to step 9.
The receiver can save 6 different transmitter
codes in memory. If you want to save multiple
transmitter codes you need to repeat steps 7A
through 7C.
The memory is retained if the receiver is installed
somewhere else or if the power goes out.
8A. Setting auto-off time
In addition to regular on/off use it is possible
to set three different auto-off times:
1. Automatically switch off after 1 second
2. Automatically switch off after 5 seconds
3. Automatically switch off after 2 minutes
8B
Press the connect button for no more than
1 second and then release it.
EN