8-EN
EN-9
1.3 Positioning the monitor
Place the monitor in a convenient location close to your personal computer. We suggest that the
unit be positioned so that the top of the screen is just above eye level.
1.4 Connecting the signal cable
The 15-pin D-shell signal connector on the signal cable will connect easily to the video adapter
output on your personal computer. Lock both screws on the connector to ensure a firm connection.
Figure 2
Connecting the signal cable
A
Power Socket & Power Cord
B
Signal Cable with 15-pin D-shell Connector
Chapter 2 - Using the monitor
2.1 Turning the monitor on
1.
Turn the PC power switch ON. Then turn the monitor power switch ON, by pressing the
switch inward. The green power indicator will light up.
2.
Allow about 30 seconds for the CRT tube to warm up. Data will be displayed on the screen.
3.
To turn the monitor OFF, press the switch again.
4.
If your display fails to function properly, try to solve the problem with the information in
Chapter 3 "Troubleshooting".