Communicator ISDN 128 PCI
11
5.
Type in a name for your connection into the dialog box that
appears (e.g., ‘Internet 1’) and then click on ‘Next’.
6.
Follow the instructions on the screen and fill in the data that is
requested. Click on ‘Next’ to proceed to the next screen.
7.
Click on ‘Finish’ to complete the installation.
3.2.2 Addition of an extra channel for 128k
1.
Go to the dialog box ‘Dial-Up Networking’.
2.
Select the connection (‘Internet 1’) that you want to use for
multilink.
3.
Click on the ‘More’ button. A list appears.
4.
Select ‘Edit entry and modem properties’ from the list that
appears.
5.
Click on the ‘Basic’ tab. Check the data and change it if
necessary (see Figure 5).
Figure 5: Settings of the connection
6.
Select ‘Multiple lines’ in ‘Dial Using’.
7.
Click the key ‘Configure...’ and follow the instructions on the
screen. The result can be seen in Figure 6.
