Trust GeForce 256 32MB AGP
3
GB
2. Safety
Before using the product, please read the following instructions carefully.
1. Computer components are sensitive to static electricity. You can discharge yourself by touching the
computer casing.
2. Switch off the computer and remove the plug from the wall socket before opening the computer.
3. Make sure that the components you are adding to your computer are compatible with your system.
4. Hardware
installation.
2.1 Minimum system requirements
•
Pentium II processor
•
64 MB RAM
•
Windows 95 OSR2, 98, 2000 of NT4 (Service Pack 3)
•
Free AGP slot
•
25 MB free hard disk space
•
4x CD-ROM drive
2.2 Installing the Trust GeForce 256 32MB AGP
Note:
If another VGA card (the card you connect the monitor to) is still in your system, then you should
remove this before you install the Trust GeForce 256 32MB AGP.
1. Turn off your PC.
2. Remove the plug from the wall socket.
3. Remove the computer casing (if necessary, read your computer's instruction manual).
4. Remove the metal cover plate or your old VGA card from the AGP slot.
5. Insert the Trust GeForce 256 32MB AGP into the AGP slot (brown colour) and screw the card firmly into
place.
6. Close the PC.
7. Connect the monitor cable.
8. Turn on the computer.
