Trust Flex Design 16937, Руководство пользователя

Страница: 6 / 75

Flex Design Tablet
– User’s Manual
4
Advanced configuration (Advanced configuration)
The illustrations for the following instructions are located at the end of this manual
To access the tablet’s configuration utilities, click on the Trust icon in your System Tray
( next to your computer’s clock)
With the driver installed, the Trust tray utility will load automatically when you connect the tablet to your
computer.
Pen Pad (Tablet properties):
This utility consists in 2 tabs (About, Buttons).
About
Unit The dimensions of the tablet can be displayed in inches or centimeters.
Mode: Pen (Absolute)
In this mode, when you touch the tablet’s surface, the cursor will jump to the
corresponding on-screen zone.
Mode: Mouse (Relative)
In this mode, the cursor remains where it is when you lift the pen.
Buttons
Pen Buttons settings
Assign one of the following functions to one of the two pen buttons:
-
None (disable this button)
-
Left click
-
Left double click
-
Right click
-
Right double click
-
Middle click
-
Middle double click
-
ScrollBar Move Up/down
-
Scrollbar Move
The pen tip, when tapping, is considered a left click.
The “Default” button allows you to restore the default settings
Pen Offset Value
This setting determines the distance required between the pen tip and tablet’s
surface.
When using the Auto Setting, the tip only needs to be 1mm from the surface for
the tablet to detect movements.
Clicking the “Adjust” button allows you to customize this distance.
Click Pressure
(8 steps setting: from 0 to 8)
This setting determines the amount of pressure required for the tablet to perform
a click. Try your pressure setting by clicking the “Test” button.