TRUST FAMILYC@M 500 FLASH
5
UK
3. Functions of the ‘TRUST FAMILYC@M 500 FLASH’
3.1 Camera
functions
Figure 1: Functions of the ‘TRUST FAMILYC@M 500 FLASH’
A
Exposure button
G
LCD display
B
Viewfinder
H
Menu button
C
Flash
I
Flash button
D
Fixing point for wrist band
J
Flash indicator
E
USB port
K
ON / OFF button
F
Lens
Table 1: Functions of the FAMILYC@M 500 FLASH
3.2 LCD
functions
3.2.1 Battery
condition
The battery condition is shown on the LCD screen
G
(figure 1) as follows:
The batteries are full.
The battery capacity is low. When the camera is turned on, the symbol will flash three times
and the camera will make a sound to indicate that the batteries should be replaced. A few
photographs can still be taken. To avoid loosing the photographs, all the photographs should
be uploaded onto your computer before replacing the batteries.
The batteries are empty. When the camera is turned on, this symbol will flash five times and
the camera will turn itself off automatically. Replace the batteries.
Table 2: Battery conditions
Note
:
The TRUST FAMILYC@M 500 has an internal battery for saving the camera’s memory when
replacing the batteries. This battery has a back-up time of 5 minutes and is charged by the USB
port and the replaceable batteries.
Note
:
When the batteries are low or empty, all the photographs you wish to keep should first be
uploaded onto your computer and saved before the batteries are replaced. After 5 minutes, all the
photographs will be deleted from the camera’s memory when the batteries are replaced.