Trust Energy Protector 325, Руководство пользователя

Страница: 11 / 20

7
Chapter 3:
Setup
Figure 3 Connections
# 1 connects the UPS to the mains.
# 2 connects the UPS to your PC for power supply.
# 3 connects the UPS to the serial input of your PC to allow
you to view the status of the UPS with special software (525).
1. Placement
Install the UPS in a protected area with adequate air flow
and free of excessive dust. Do not put the UPS in an area
with extreme temperatures or humidity.
2. Connecting Computer Interface (Optional)
UPSMON or other power management software and
interface kits can be used with this UPS. Use only kits
supplied or approved by the manufacturer.
Connect the interface cable to the 9 pin interface port on the
rear panel of the UPS, if you want to use this option (see
figure 3: # 3).