USER'S MANUAL
1
Product information
Front
A: E-SATA port
B: LED indicator
C: Headphone/line-out jack
D: Microphone/line-in jack
E: USB 2.0 port
F: Firewire port
G: SATA port
H: CF/MD slot
I: SM slot
J: MS slot
K: SD/MMC slot
UK
Installation
1
Connect cables:
Connector O to header N
Connector Q to header M
Connector W to header L
Connectors:
P: USB
R: Firewire
S: SATA
T: USB
U: Microphone plug (pink)
V: Headphone plug (green)
2
Turn off PC; unplug power
3
Remove side panel
4
Remove 3,5inch bay cover; Slide in multi bay
Install at a lower bay when use in a big case.
5
Tighten screws
6
Remove PCI bracket; Put cables through included PCI bracket and put in PC
7
Connect cables to back of PC
8
Connect SATA cables to PC motherboard
Refer to your motherboard manual for specific information
9
Close side panel
10
Plug in power; Turn on PC
Note
Place a card into the reader in a wrong direction or by force may cause damage
If you format a card on your computer and then use it in your digital camera or other portable device, the
device may no longer recognize the format of the card. It is, therefore, recommended to always format the
card using your digital camera or the portable devices
Check if it’s write protected when you are not able to copy data to a card
If you experience intermittent problems after Windows resumes from sleep, hibernation or computer
inactivity: go to Device Manager > Universal Serial Bus Controllers > USB Root Hub > Power
Management, Uncheck the box “Allow computer to turn off this device to save power”. Uncheck all boxes
on all root hubs
Inappropriate use may result in the loss of your data. Trust is not directly or indirectly responsible for this