TRUST AMI MOUSE 250S CORDLESS
3.2
Connecting the mouse
Note:
Before connecting the TRUST AMI MOUSE 250S CORDLESS to
the PS/2 port the former mouse software has be deleted.
1.
Make sure your computer is shut down and that any old mouse drivers have
been deleted from your system.
2.
Connect the IR receiver to the PS/2 port of your computer.
3.
Start up the computer.
•
All operating systems will autodetect and install the mouse.
4.
The green LED on the IR receiver will light up when the mouse is moved.
3.3 Software
Installation
1.
Place the CD-ROM in your CD-ROM drive. The Installer will start up
automatically.
If it doesn’t, do the following:
a)
Select ‘Execute’ in the Start menu.
b)
Type [D:\SETUP.EXE] and click ‘OK’ in order to start up the Trust
Software Installer.
2.
You will see a screen as in Figure 2.
3.
Click the language you wish to use during the installation.
4.
Click 'TRUST AMI MOUSE 250S CORDLESS‘ in order to start up the
installation.
5.
Follow the steps onscreen.
6.
At the end of the installation, Figure 3 will appear. Select ‘Yes, I want to restart
Windows’ and click ‘Finish’. Windows is now restarted and the mouse is ready
for use.
4 Usage
4.1 Mouse
An explanation on the button functions is given in Table 1, in combination with Figure
4.
Button Function
Note
A
Right mouse button
Button 1
B
Left mouse button
Button 2
C
Scroll wheel + third
mouse button
Vertical scrolling. Push the wheel in order to
use the third mouse button.
Table 1: Button Functions
2
