TRUST 913 POWERC@M ZOOM
Point
Description
Symbol
U K
where there is very little light. You can also use
the flash in well lit surroundings to avoid
undesirable shadows.
5
Video Out Port
Connect your video out cable here and the
other end to your television set in order to use
the television to preview your pictures.
6
USB connection
The USB (Universal Serial Bus) port is used to
connect the camera to a PC as well as for
transferring photos. The USB port also enables
you to use the camera as a PC camera.
7 Lens
Focus
Switch
Optimize the focus for portrait or landscape
style photos.See section 6.2.
8
Lens
The lens focuses the light onto the digital
image capturing circuitry. For the best picture
quality, care should be taken to ensure it
remains free of dust, fingerprints, and
scratches.
Table 1: Functions on the top, front and side of the camera
4.2
Functions on the back
Functions on the back of the camera (figure 2)
Point
Description
Symbol
1
LCD display
Use the LCD Screen to preview photos.
The LCD Screen can be used to check the
configuration details while in the Setup menu.
2 Left
Button
(
Å
)
Use the Left Button to broswse to the left during
picture playback.
The Left Button can be used to reduce the lighting
level while in Capture mode and Film mode.
3 Buttom
“T”
(zoom
in/browse
up) (
Ç
)
Use the Zoom-in Button to zoom-in on your subject
while in Capture mode.
Use this button to zoom-in on a photo while in
Playback mode.
The Zoom-in button is also used to move up through
menus.
4 Right
Button
(
Æ
)
Use the right button to browse to the right while in
Playback mode.
You can use the right button to raise the lighting level
while in Capture or Film mode.
5 Button
“W”
(zoom
ou/browse
down) (
È
)
Use the Zoom-out Button to zoom-out on your
subject while in Capture mode.
In Playback mode, use this button to Zoom-out and
switch between Thumbnail Review and Full-Screen
modes.
The Zoom-out button is also used to move down
through menus.
3
