TRUST ISDN PC-CARD MODEM
2
1. Introduction
This instruction manual is intended for users of the Trust ISDN PC-Card modem. Basic knowledge of
computers is necessary to be able to install this product. Please consult the chapter ‘trouble-shooting’ if you
have any problems. The last page of this electronic instruction manual, as well as the back of the printed
quick installation manual, contains more information about Customer Care Centres
1.1
Conventions used in the manual
The following conventions have been used in the manual to indicate instructions:
<
key
>
Here you should press a key. The name of the key is given between brackets.
‘
System
’
This is a specific term used in a program. These are terms used by, for example, Microsoft
Windows 98.
[
DIR
]
Type the text shown between brackets [….].
(term)
The text between the parentheses (….) is the English term, e.g. (File) used in the figure
referred to.
Extra information will be shown as follows:
NOTE
:
Extra information will be shown as follows.
The examples assume that the letter "D" has been assigned to your CD-ROM drive. If your system uses a
different letter for your CD-ROM drive, for example "E", you should replace "D" by "E".
1.2
Contents of the box
Check the contents of the box before going through the user manual. It should contain the following:
•
ISDN PC-Card Modem
•
ISDN RJ-45 cable
•
Transport
box
•
Multi-lingual quick installation manual
•
CD-ROM with drivers, applications and user manuals
•
CD-ROM with RVS-COM (optional)
If anything is missing or damaged, please contact one of the Trust Customer Care Centres. You can find
more information at the back of this instruction manual.
1.3
Minimum system requirements
•
Pentium 166 MHz MMX processor
•
16MB system memory (32 MB is recommended)
•
PCMCIA 2.1 type 2 card slot
•
10 MB free Harddisk space
•
4X CD-ROM drive
•
Windows 95, 98, Me, or 2000
•
ISDN telephone line
