TeleViewer
6
Figure 2: Block diagram for the TeleViewer connections
4. Use
You can adjust the picture using the buttons on the TeleViewer. Follow the
instructions below to adjust the picture.
1. Using switch 4 (B), switch to the desired video output (see figure 1). Use the
screwdriver supplied to switch between outputs.
Video output
Switch 4
Switching on RGB-video (E)
ON
Switching on composite (C) and S-VHS (D) video
OFF
2. Start the computer.
3. Turn on your TV and select the correct video input to which the appliance is
connected. You will see the image of your computer on the TV screen if the
cables are connected correctly.
4. If necessary, switch between the PAL and NTSC television standards using the
switches 1, 2 and 3 (B). See the table below for the settings.
Switch
Television standards
1
2
3
NTSC
ON
ON
ON
NTSC-EIA
OFF
ON
ON
PAL-M
ON
OFF
ON
PAL-N
ON
ON
OFF
PAL-B/D/G/H/I *
OFF
ON
OFF
PAL-Combination N
OFF
OFF
OFF
* Standard setting. This is the most commonly used standard in Europe.
