TeleViewer
2
1. Introduction
The manual is intended for users of the Trust TeleViewer. Prior knowledge is not
necessary to install and use this product.
If you have any questions after reading this manual, please contact one of the
Trust service centres. You will find information on the service centre nearest to
you at the back of this manual. You can also visit the Trust website
(www.trust.com) for support, comprehensive product information, drivers, and
FAQ's (Frequently Asked Questions).
1.1 Conventions used in the manual
The following conventions have been used in this manual to indicate instructions:
<
key
>
Here you should press a key. The name of the key is given between
brackets.
‘
System
’
This is a specific term used in a program. These are the terms used
by, for example, Microsoft Windows 95.
[
DIR
]
Key in the text shown in square brackets [….].
(term)
The text between the parentheses (….) is the English term, e.g.
(File) used in the figure referred to.
Additional information will be shown as follows:
Note
:
Do not connect the TeleViewer whilst your computer is still turned on.
1.2 Contents of the package
Before reading the manual, please check the contents of the package. It should
contain the following:
•
TeleViewer
•
Y cable for VGA
•
S-VHS
cable
•
Composite video cable
•
RGB to SCART cable
•
PS/2 power supply cable
•
DIN power supply cable
•
Small
screwdriver
•
This instruction manual
Please contact your dealer if anything is missing or damaged.
1.3 Minimum system requirements
•
Computer with a standard VGA/SVGA signal
•
PS/2 or DIN keyboard connection
•
TV set with Super VHS, SCART or composite video connection
