TRUST 110T SPACEC@M
5.
You must select a camera during the installation. Select the TRUST 110T
SPACEC@M as the camera you wish to use for NetMeeting and click on
'Next' to continue.
6.
Select 'Put a shortcut to NetMeeting on my desktop' if you wish to have a
shortcut to NetMeeting on your desktop.
Select 'Put a shortcut to NetMeeting on My Quick Launch bar' if you wish to
have a shortcut to NetMeeting on your Windows taskbar. You do not have to
select either option if you do not wish to.
7.
Click on ‘Next’ to continue with the installation. Follow the on-screen
instructions to configure the audio and image settings.
8.
At the end of the installation process, click on ‘Finish’ to complete the
installation of NetMeeting. NetMeeting will now start automatically.
If you are not able to properly test or configure your audio settings, check whether the
sound card and the devices satisfy the system requirements for NetMeeting and/or
whether these have been correctly connected and installed.
4.4
Installing Microsoft ® NetMeeting (Windows XP)
NetMeeting is installed as follows in Windows XP.
1.
Click on the 'Start' button in the bottom left-hand corner of your taskbar.
2. Select
'Run'.
3. Type
‘conf’.
4.
The NetMeeting Wizard will appear after approximately 30 seconds.
5.
Follow the on-screen instructions to install the program.
4.5
Installing Windows Messenger (Windows XP)
Windows Messenger is already installed in the Windows XP operating system. You
can select Windows Messenger from the ‘Start’ menu to start the program. Follow the
on-screen instructions to enter your personal settings.
After the installation, you can check to see whether everything has been installed
correctly. See the next chapter for instructions on how to do this.
5
Checking after the installation
After installing the device and the programs, the following are installed on your
computer and can be checked.
‘Start – Settings – Control Panel’. Double-click on the ‘System’ icon and select the
‘Device Manager’ tab.
- Imaging Device – TRUST
120/
110T SPACEC@M
‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove
Programs’ icon.
- 120/110T SpaceC@m
- ArcSoft PhotoImpression
- ArcSoft VideoImpression
Start - Programs - Trust - …
- Uninstall 120/110T SpaceC@m
Note:
The information given above will vary when the installation has been
altered by the user (for example, not everything has been installed or
locations other than the default locations have been selected).
Note:
Deviations may also occur as a result of using new drivers available on
the Internet.
Note:
The location or name may vary in the ‘Control Panel’ for different
operating systems.
4
