1
SAVE THESE INSTRUCTIONS
You will need this manual in order to check safety and caution
rules, assembly instructions, operating and maintenance
procedures.
Keep your invoice with this manual. Fill in the invoice number in
the inner side of the front cover. Keep the manual and invoice in
a safe and dry place for future reference.
SAFETY INSTRUCTIONS
AVISO:
When using tools, basic safety precautions
should always be followed to avoid risk of personal
injury as well as damaging the equipment.
Read all the instructions before using any tool.
1. Keep your work area tidy
. Cluttered areas and benches invite
accidents.
2. Consider work area environment
. Do not use power
tools in damp or wet locations. Do not expose power
tools to rain. Keep work area well lit.
Do not use power tools where flammable liquids or
gases are present.
3. Guard against electric shock
. Prevent body contact
with grounded surfaces such as pipes, radiators or
refrigerators.
4. Keep children away.
Children should never be near
work area.Children are not permitted to hold machinery,
tools or extension cables.
Visitors are not allowed to handle tools; they should
be kept away from work area.
5. Store idle tools.
When not in use, tools should be
stored in dry and dust free shelves, padlocked and out
of children’s reach.
6. Do not force the tool.
It will do the job better and safer at
the rate for which it was intended.
Do not use inappropriate attachments to exceed the tool’s
capacity.
7. Use the right power tool.
Do not force small tools to do
heavy-duty jobs. Do not use power tools for heavy-duty jobs
for which it was not designed.
8. Dress properly.
Do not use loose clothing, gloves, ties or
jewelry. They can be caught in moving parts. Non-skid
footwear is recommended. Use protective hair covering to
contain long hair.
9. Protect your eyes.
Always wear appropriate safety
accessories authorized by the Mexican Official
Standard (Norma Oficial Mexicana NOM). Wear
goggles, face and dust masks when working with
materials that shed metallic parts, shavings or
chemical dust.
10. Do not use the power cord for purposes different than those
it was intended
. Do not carry tool by the power cord or yank
to disconnect it from socket. Protect cable from heat, oil and
sharp edges.
11. Secure work piece
. Use clamps or vices to hold work piece
steady. Is safer than using one hand and enables to use both
hands. Keep proper footing and balance at all times. Do not
overreach over or walk across the tool when is running.
12.
Do not extend your range of action.
Avoid a standing position
that makes you get tired. Keep a safe position and stable
balance.
13. Keep tools in the best conditions
. Keep tools clean to get
better performance. Follow lubrication and appliance
replacement instructions. Verify periodically the tool’s cables;
if damaged have them repaired in a Truper® Authorized
Service Center. Handles should always be clean, dry and free
of oil and grease.
14. Disconnect tools.
Disconnect tools when idle, and before
servicing.
15. Reduce the risk of unintentional starting
. Do not carry a
plugged-in tool with your finger on switch. Be sure switch
position is OFF before plugging in power cord.
16. Outdoor use extension cords.
Extension cords should be
equivalent and duly marked.
17. Stay alert
. Watch what you are doing. Exercise common
sense. Do not operate tool when tired.
18. Check damaged parts
. Before using the tool,
carefully check guards or damaged moving part.
Ascertain it operates and performs properly. Check
moving parts alignment, binding, breakage, mounting
and any other condition that may affect its operation.
In order to guarantee proper function of the tool, all
components should be adequately assembled and
complying with the requirements. Any worn switch
should be replaced in a Truper
®
Authorized Service
Center. Do not operate any power tool if the ON/OFF switch
is not working.
19. Parts and accessory replacement
. When in need of replacing
parts use only original Truper
®
spare parts designed to be
used with this tool.
20.
For your personal safety use
only accessories or additional equipment specified in
this manual or recommended by the manufacturer.
Using of any other accessory not specified in this manual
may present risk of personal injury.
21. Ear protection.
When performing services with a
noise level higher than 85 dB wear protective earplugs.
This tool is not designed for people (children included) whose
physical, sensorial or mental capacities are reduced. Neither
by inexperienced people or with no knowledge of the tool;
only if they are supervised by persons responsible of their
safety or who have received previous instructions on how to
operate the tool..
Children should be supervised to verify they do
not play with the tool. It requires tight supervision when
disabled people or children use any power tool or are
near one.
CAUTION
NOTE
CAUTION
