Truper 17269, Руководство пользователя

Страница: 25 / 32

9
Start up
Operation
• Sketch the cutting line onto the work piece.
• Connect the saw.
• Hold the saw firmly in front of you and with no
obstacles. Double-check the blade is not obstructed by
any object.
• To minimize kickback and vibration keep the saw’s pivot
type shoe firmly leaning on the work piece.
• Lightly set the blade against the work piece.
• Before starting the cutting process press the trigger to
start the tool. Let the saw reach the required speed
(depending on the type of blade and materials).
• Firmly drive the saw along the sketch previously drawn.
Additional advise
• The blades cut in the saw’s direction. In fine work like
panels or fiberglass, set the visible face of the material to
cut in the saw’s back.
• Cut only with sharp blades. These types of blades make
cleaner, faster cuts and cause less tension to the motor.
• Always use the right blade for the material to be used
and have extra blades handy to use in case of wear out.
Replace blunt, crooked or broken blades immediately.
ENGLISH
• To prevent damaging the blade
the tip of the blade shall extend
beyond the pivot type shoe and
the work piece during the cutting
swing.